Nuclear Power Plant

Nuclear rigging job

Learn how a nuclear power plant used Airfloat to move essential equipment on a low capacity floor.

The Situation

An Airfloat customer required a non-wheel solution for the movement of and installation of tube bundles, which weigh in excess of 100,000 lbs., into the heat exchanger jackets at a nuclear power plant. Low floor-load capacity prohibited the use of wheeled equipment.

The Solution

Airfloat manufactured four of its L50 Platforms, each with 50,000-lb. load capacities. The platforms were then interconnected, causing them to function as one long platform. The platforms utilized 30-in. removable air bearings. Air flow requirements were 80-100 SCFM.

Use of Airfloat equipment resulted in a 50% reduction in the time required for this repair.

The Results

The load movement system not only allowed easy movement through the plant at floor loading under 300 lbs. per square foot, but also allowed tube bundles to be floated out of and into the heat exchanger jacket. Use of Airfloat equipment resulted in a 50% reduction in the time required for this repair.

Click here for printable version.

Learn how air caster technology can work for you. CONTACT US
Must-Read White Paper: 10 Most Common Mistakes Made When Purchasing Automation Equipment​
Related Applications
  • Airfloat transmission drive axle transporter
  • Heavy Loud Movement
  • Airfloat machine movers
Related Equipment
  • Air Platform
  • Airfloat air skid
  • power tugger