For more than 40 years, Airfloat has been providing pneumatic part positioning solutions to help companies in every industry achieve safe, ergonomically correct operations.
Airfloat engineers excel at evaluating your process and recommending lean manufacturing solutions. From start to finish, we custom-design and manufacture industrial material handling equipment to provide solutions specifically for your operations. All systems are built to Airfloat and Industry standards and are designed for easy maintenance and high life cycle to assure your ROI expecations are met.
In addition to custom designed systems, we commenly provide the following ergonomic materal handling equipment and many other standard products.
Airfloat lifts are designed to ANSI Standard MH29.1-1994.
CollapsableLow Profile Lift Tables
4” collapsed height with 24” of vertical stroke
100% pneumatic operated system
Standard Size is 50” x 42” – can be customized
Minimal Maintenance with all Airfloat pneumatic lifts.
Airfloat lifts designed to ANSI Standard MH29.1-1994
Constructed from welded structural steel shapes
Solid steel cross arms CAD designed and engineered for optimum performance, strength, and durability
Heavy-duty lag down end angles
Capture track for rollers
Steel service block (lift)
Painted with Airfloat safety orange air dry enamel
Air requirements: 60-85 PSI @ 30 CFM
Safety Skirt
Lift with Oversized Rotate
Custom lift tables with oversized tops, rotates or tilts designed for specific load applications. All ergonomic equipment is built for safety and reliability.
4,000 lb. 90° Upender
Custom-designed upenders from light loads to high-capacity with degree of tilt designed for each application.
Pneumatic Lifts with Tilt
For lifting and tilting 2,000 to 6,000-pound loads, Airfloat pneumatic tilts are bolt-on or stand-alone. Safety features include a toe kickplate, two up-stop chains per actuator, a safety prop for maintenance of the tilt, corner retainer angles to hold the container in place, and a solid steel enclosed base pan to protect internal components. Quality construction provides years of reliable service: cross arms and rollers, both top and bottom, are solid steel. There is a capture track for both upper and lower rollers.
Pneumatic Scissor Lifts
Airfloat pneumatic scissor lifts are carefully engineered for optimum performance, strength, durability, and safety in lifting 2,000 to 6,000 pounds. The cross arms and rollers, both top and bottom, are solid steel. There is a capture track for both upper and lower rollers. The toe kick-plate helps prevent worker injury. Welded structural steel shapes provide tough, reliable, and safe lifting. The foot control provides hands-free control of the air pressure, 60-85 PSI at 30 CFM.
Pneumatic Lifts and Rotates
This Airfloat designed pneumatic lift can be purchased in 2,000, 4,000, or 6,000 lb standard models with 24" of stroke. Standard with safety block and skirt for worker safety. Optional corner locators and friction brake add to this versatile design which will speed production and reduce worker injury. Foot or hand controls available, optional tilt and/or rotate tops.
Pneumatic Tilt Tables
Airfloat Pneumatic tilt tables, bolt-down or stand-alone, lift 2,000 to 8,000 pounds. Safety features include built-in maintenance prop and corner angles to hold the container in place. Custom tilts for large capacity loads also available.
Zero Lifts
This 3,000-pound-capacity lift allows a pallet jack to roll right onto the deck (half-inch steel plate) from the shop floor. The Airfloat safety locking bar stops the deck five inches from the floor in event of air pressure loss when the deck is in the raised position, 36-inch lift stroke.
Mechanical Rotate Tables
A 4,000-pond-capacity lift table with rotating top reduces the risk of operator injury by positioning parts more accurately from each layer of dunnage in the container, due to the variable 24-inch lift. Medical claims for back injury were reduced.
Low Profile Lift Tables
